Publication Laka-library:
Chemical and physical analysis of core materials for advanced high temperature reactors with process heat applications (1985)
| Author | KFA Jülich |
| Date | August 1985 |
| Classification | 2.01.9.62/05 (GERMANY - JÜLICH) |
| Front | ![]() |
From the publication:
INTRODUCTION The development of the high temperature reactor (HTR) started in the mid 1950s and since that time the technology of the system has progressed steadily. The reactor system is characterized by: - the use of ceramic fuel particles, coated to provide fission product retention; - an all-graphite core construction - helium gas as the primary coolant. The Dragon Reactor Experiment in the United Kingdom and operation of the test reactors at Peach Bottom in the USA and the AVR in the FRG have resulted in the construction of two prototype plants: the Fort St. Vrain Reactor with 330MWe in the USA and the Thorium High Temperature Reactor with about 300 MWe in Schmehausen, FRG (ref. 1). In Germany the prime motivation for HTR development lies in its dual role as an economic source of both electric power and high temperature process heat. The most important potential application of HTR technology is to the gasification of lignite and anthracite coals to produce a substitute natural gas. The incorporation of an HTR into the coal gasification process will be facilitated by the development of hydro- gasification and steam-gasification methods. Great significance is to be placed on the production of synthetic gas (CO + H2) via a steam reforming system. The use of nuclear process heat for such endothermic reactions requires reactor coolant outlet temperatures between 850 and 10oooc. Fig. 1 shows processes that might be used in connection with the methane reforming process. The experimental reactor AVR has been operating since 1974 with a primary coolant temperature of 950˚c. This has been made possible by the development of a wide range of materials for the specific components of the core of high temperature reactors. Key factors are naturally the fuel elements and their components, particularly the coated particles, and the graphite as a core construction material. The use of nuclear process heat from HTR demands suitable materials not only for the "in-core" components but also for the "out-of core" components, such as hot ducts, tubes for the steam reforming system and the intermediate He/He heat exchanger, for which Fe-Ni-Cr and Ni-Cr alloys are envisaged.
This publication is only available at Laka on paper, not as pdf.
You can borrow the publication or request a copy. When we're available, this is possible for a small fee.

