Publication Laka-library:
Safeguards Agreement under NPT between [ ] and the IAEA. M-09 (Fuel fabrication plant with three parallel process areas) (1976)
| Author | IAEA |
| Date | October 1976 |
| Classification | 6.03.1.30/63 (PROLIFERATION - NON PROLIFERATION TREATY - CONTROL / SAFEGUARDS) |
| Front | ![]() |
From the publication:
M-09 (Fuel fabrication plant with three parallel process areas) October 1976 Explanatory Note This model is intended to provide guidance for the preparation of a facility attachment pertaining to a fabrication plant, which has more than one process area. (For a plant with one process area, there is a separate model, M-03). The description of the plant in Code 1.4 is obviously illustrative, and the formulation of Codes 3 and 4 has been geared to suit the description. The repetitive pattern of numbering KMPs for MBAs 2, 3 and 4 has been dictated by the present limitation of one numeral for E D P purposes. There would be no objection to the KMPs being numbered consecutively, provided the number of KMPs does not exceed 9. In regard to KMP Code 2 of Code 4.1 for MBA 1, when material is shipped to other MBAs it will be measured by the operator either on shipment from MBA 1 or on receipt in one of the other MBAs. In the case of shipment from MBA 1 to an outside facility, the operator may do so either on the basis of the supplier's data or of his own measurements. In Codes 4.1 and 4.2 the column for material description codes should be completed, depending on whether the old or the new material description codes are in use in the country concerned. In Code 7.1, the mode of intermittent routine inspections should not be regarded as of universal application. The mode would depend, inter alia, on the throughput.
This publication is only available at Laka on paper, not as pdf.
You can borrow the publication or request a copy. When we're available, this is possible for a small fee.

![Safeguards Agreement under NPT between [ ] and the IAEA. M-09 (Fuel fabrication plant with three parallel process areas)](/docu/catalogus/png/6-03-1-30-63.png)